Programming Remotes and Your Keyless Entry

First off you need to make sure all your remotes have brand new batteries. Then, find the “learner” or “smart” button on your operator. It could be one of three colors: green, red, purple. The newer operators since 2007 have the purple learner button.

Instructions for programing your remote:

• Press and Release the learner button.
• Press and Release the appropriate button your remote for the door.
• Done!

Instructions for programming your keyless entry go as follows:

• Press and Release the learner button.
• Enter your 4 Digit security code.
• Hit Enter and Release, repeat.
• Done!

Garage Door Operator FAQ

If your garage door operator isn’t working properly and the lights are flashing check these quick tips out!

# of light flashes

1 – The Protector System wire open or totally misaligned

2 – The Protector System wire shorted or black/white wire reversal

3 – Door Control or Multi-Function control Panel wire shorted

4 – IR sensor slightly misaligned (dim or flashing sensor LED)

5 – Motor overheated/Possible RPM sensor failure — unplug to reset

6 – Motor circuit failure — replace RX/LX board

New Accents line from C.H.I. !!

Check out the new Accents line of doors from our manufacturer!! These doors have the look of a wood finish in dark and light colors but at a fraction of the cost.

Accent Doors!!

2011 Evansville Garage Doors Spring Blast!!!!

Carriage House Sale!!!

Come in and receive $25-$50 off any Carriage House door!!! This discount applies to all Installed doors as well as Cash & Carry doors!!!

Guide to Buying a Garage Door

Make sure to think about these and other specifications next time you decide to buy a new garage door!

• Maintenance

• Insulation (R-Value). Higher the Better!

• Styles: Raised Panel, Recessed, Flush, Carriage House, Full-View

• Thickness of Panels

• Durability and Composition

• Construction

• Available Colors, Finishes, and Window Options

• Strength/Gauge of Track, Hardware, and Face Steel

• Security and Safety Issues

• Warranties

• Extension or Torsion Springs?

Garage Door Preventative Maintenance

Here are some tips to help minimize the wear and tear that your garage door might take from daily use:

• Inspect the entire garage door system.
• Tighten and inspect all door hardware.
• Lubricate (non-silicone) all moving parts; i.e. hinges, rollers, springs, pulleys.
• Check bottom weather seal.
• Check sides and top outside weather seal.
• Check the spring tension to make sure the door is properly balanced.
• Check the cables and springs for any damage or wear.
• Verify the operation of all safety features.

And yes you can even WASH your garage door!! Use this simple method to keep the outside of your door as clean as the car inside!

Wash your garage door with a mild detergent, such as a dish detergent, and a car brush. To remove tough stains, use an all-purpose cleaner for the home. Thoroughly rinse the surface with a garden hose. Waxing your garage door once a year with liquid car wax will protect its lustre. For best results, never apply wax in direct sunlight.